Sonnet-technologies Web Management Tool Manual do Utilizador

Sonnet Web Management Tool User’s Guide for Fusion Fibre Channel Storage Systems

41.1 Ensure Drive IntegrityAfter Creating RAID Groups 1. If you’re not already in the Sonnet Web Management Tool, type the IP address of your RX1600F

51.1 Ensure Drive IntegrityFigure 4Figure 3Drives selected for initialization and verification when the Initialize and Verify Drives page is displayed

61.1 Ensure Drive IntegrityFigure 5Drive Performance and Health Page Drive Info tab

71.2 Configure Storage into RAID GroupsThe Fusion RX1600Fibre enables configuration of storage into JBOD, RAID Level 0, 1, 1+0, 4, 5, 6, or DVRAID RAID

81.2 Configure Storage into RAID GroupsSelecting a Quick Storage ConfigurationAfter initializing drives or setting up new storage, select an applicatio

91.2 Configure Storage into RAID GroupsAudio (continued) 3. If all your drives do not appear in the Find Drives box, click System Scan. This setup req

10Creating a Custom Setup (continued) 9. Click Next. 10. Choose the number of partitions for the RAID group. See Figure 13 on page 15. • A RAID

11Windows Drive Formatting 1. Select Start > Control Panel > Administrative Tools from the Windows Start menu. In the Administrative Tools wind

121.2 Configure Storage into RAID GroupsFigure 6Initial Setup page before a storage configuration has been selectedFigure 7Quick Digital Video Setup Wi

131.2 Configure Storage into RAID GroupsFigure 8Audio Setup Wizard start pageFigure 9General Digital Video Setup Wizard start page with all drives sele

141.2 Configure Storage into RAID GroupsFigure 10Custom RAID Setup Wizard start pageFigure 11Selecting the RAID level and RAID group name using the cus

151.2 Configure Storage into RAID GroupsFigure 12Creating a RAID group comprised of eight drives using the custom RAID Setup WizardFigure 13Creating a

161.2 Configure Storage into RAID GroupsFigure 14Selecting automatic SCSI-FCP LUN mapping for RAID partitions using the custom RAID Setup WizardFigure

171.3 Modify System ValuesDefault values are appropriate for most configurations, but may be modified for your needs using the Sonnet Web Management Too

181.3 Modify System ValuesFigure 16System Configuration page

191.4 Monitor Storage, ConfigurationsYou may determine the performance of drives in the Fusion RX1600Fibre or attached RX1600 Expansion systems using v

201.4 Monitor Storage, ConfigurationsFigure 18Fusion RX1600Fibre configuration and status information displayed on the Configuration Display pageFigure

21When an event occurs that warrants Email notification, the RX1600Fibre sends the message; it cannot respond to a rejection by a server for an invalid

221.5 Remote System MonitoringFigure 19Error Notification setup page

23You may determine the performance of drives in the Fusion RX1600Fibre and attached RX1600 Expansion systems using various displays and tests in Sonn

1.0 Getting Started... 1 Disc

24Identifying a DriveYou may want to physically identify a drive in the RX1600Fibre or attached RX1600 Expansion systems. This method will work even i

251.6 Drive DiagnosticsFigure 21Drives selected for testing on the Read-Only Drive Test pageFigure 20Diagnostics Menu page

261.6 Drive DiagnosticsFigure 22Drive Performance and Health page while a RAID group is testedFigure 23Identify enclosure, RAID group and drives, encl

27Identifying SES ElementsThe SES Monitor page found by clicking Details in the Enclosure Status section of the Health and Status Monitor page shows t

281.7 SCSI Enclosure Services (SES) Figure 25Identify enclosure, RAID group and drives, enclosure, RAID group, or individual drives using the Identify

291.7 SCSI Enclosure Services (SES) Figure 26Expanded view of an enclosure’s SES elements in the Monitor Enclosure Services page

30

311.8 Modify StorageUse the Sonnet Web Management Tool to replace a failed drive, add new drives or change RAID configurations.You may modify various a

32Changing RAID Configuration: RAID MigrationIf you have unallocated drives, you can use them to change the RAID Level of certain existing RAID groups

331.8 Modify StorageModifying RAID Group Mapping (continued) 5. Select the method you wish to use to map the partitions. Refer to Modifying RAID grou

Contents1.7 SCSI Enclosure Services(SES)... 27 Sett

341.8 Modify StorageAdding or Removing Hot SparesIf a member of a RAID group becomes degraded or faulted, lose some redundancy is lost in the RAID gro

351.8 Modify StorageAdvanced CLI PageChanges to various parameters may be made using the Advanced CLI page.Note: The Sonnet Web Management Tool is th

36Figure 28Add Drives to RAID Group pageFigure 27RAID group selected for deletion on Delete RAID Groups page1.8 Modify Storage

371.8 Modify StorageFigure 30RAID Migration pageFigure 29Add Mirrors page

381.8 Modify StorageFigure 32Split or merge RAID group partitions on the Partition pageFigure 31Selecting auto-mapping for SCSI-FCP LUNs on the Mappin

391.8 Modify StorageFigure 34Modify settings on an existing RAID Group on the Modify RAID Options pageFigure 33Rebuilding a degraded RAID group manual

401.8 Modify StorageFigure 36Clean stale RAID configuration data from drives on the Clean RAID Configuration Data pageFigure 35Add or remove global or

411.8 Modify StorageFigure 37Advanced CLI Page

42

432.0 Manage Sonnet Devices, ConfigurationsYou may save the current configuration of your Fusion RX1600Fibre, use a configuration from another RX1600Fibr

ContentsAppendix C - Multipathing... xxiii M

442.0 Manage Sonnet Devices, ConfigurationsFigure 39Use the Find Devices page to manage multiple Fusion enclosures from the RX1600FibreFigure 38Name th

452.0 Manage Sonnet Devices, ConfigurationsFigure 40System Configuration Save/Restore page

46

472.1 Interface OptionsThe best way to manage, monitor and configure the Fusion RX1600Fibre is to use the ExpressNAV Storage Manager, a browser-based a

482.1 Interface OptionsUsing TelnetUp to three Telnet sessions using the Fusion RX1600Fibre’s Ethernet management port can be conducted simultaneously

492.2 Update FirmwareFirmware updates are available on the Sonnet Web site. The ATTO FastStream controller in the Fusion RX1600Fibre has several proce

502.2 Update FirmwareFigure 41Update RX1600Fibre firmware to add features and improve usability

iAppendix A - CLI ASCII-Based InterfaceThe command line interface (CLI) uses ASCII commands typed in the CLI window.The command line interface (CLI) i

iiAppendix A - CLI ASCII-Based InterfaceCLI Error Messages The following error messages may be returned by the Command line Interface ERROR Invalid C

iiiCommand Default ExampleDumpEventLog dumpeventlogEmailFromAddress set emailfromaddressEmailNotify disabled set emailnotify enabledEmailNotifyAddress

ivAppendix A - CLI ASCII-Based InterfaceCommand Default ExamplePartitionDisplay partitiondisplay alpha1PartitionMerge partitionmerge allPartitionWrite

vAppendix A - CLI ASCII-Based InterfaceCommand Default ExampleRGResumeRebuild rgresumerebuild groupname1RGSectorSize 512 setrgsectorsize groupname1 81

viAppendix A - CLI ASCII-Based InterfaceCLI Command Explanations Command line interface commands are listed alphabetically with explanations of what t

viiAppendix A - CLI ASCII-Based Interface• Date Sets/displays the current date. The date range is 01/01/2000 to 12/31/2099. set Date [MM]/[DD]/[YYYY

viiiAppendix A - CLI ASCII-Based Interface• EmailNotifyRegulates Email notification. Default: disabled. set EmailNotify [enabled | disabled] get Emai

ix• FCMultiNodeDetermines the reported identity of Fibre Channel ports. When enabled (multiple node mode), each port reports a separate unique Node N

x• IPDNSServerControls the current DNS Server address. If IPDHCP is enabled, the DNS Server address is automatically detected. If IPDHCP is disabled,

xi• PartitionMerge (Immediate)Merges the specified contiguous partitions into one partition. GroupName is the ASCII name of the RAID Group containing

xiiAppendix A - CLI ASCII-Based Interface • ReadOnlyPasswordSpecifies a password which allows only read and no writes. It is case sensitive, 0 to 32 c

xiiiAppendix A - CLI ASCII-Based Interface• RGDisplay (Immediate) Displays status information for a single RAID group, or if All is used, all availab

1Discovering the IP addressThe Fusion RX1600Fibre is initially configured with DHCP enabled. It is best if you have access to a DHCP server. 1. Work

xiv• RGSpanDepthRegulates the span depth on the specified existing new RAID group for all RAID configurations except JBOD, which implicitly supports sp

xvAppendix A - CLI ASCII-Based Interface• RouteDisplay (Immediate)Lists all maps with RAID group partition identifier, group name and FC LUN (SCSI-FCP

xviAppendix A - CLI ASCII-Based Interface• SNTPControls whether an SNTP time server is used to set the date and time. Default: enabled set SNTP [ena

xviiAppendix A - CLI ASCII-Based Interface• UsernameSpecifies the user name for all sessions: Telnet, FTP and Sonnet Web Management Tool. It is case i

xviii

xixThe ATTO FastStream controller in the Fusion RX1600Fibre provides instant hardware data protection and intelligence to existing storage independent

xxRAID Level 1: Mirroring (Duplicate Drives)RAID Level 1 ensures the security of data by writing the exact same data simultaneously to two different d

xxiAppendix B - RAID Group DesignsRAID Level 4: Striping, One Parity DriveRAID 4 writes data across multiple drives or devices (striping) with parity

xxiiAppendix B - RAID Group DesignsRAID Level 6: Striping, Two Parity Blocks Distributed Among DrivesRAID Level 6 increases reliability for mission cr

xxiiiLoad Balancing Algorithms for OS X and Windows DSM MPIOPressure: The path with the fewest number of bytes being transferred is selected for I/O.

21.0 Getting Started Figure 1Figure 2Using the QuickNav application to find the IP address for the RX1600FibreThe Sonnet ExpressNav Storage Manager sp

xxiv

xxvAppendix D - Quick Drive Reformat InstructionsIf your Sonnet Fusion RAID storage system shipped with pre-installed hard disk drives, the following

xxviAppendix D - Quick Drive Reformat InstructionsWindows Vista Users’ Instructions (continued) 10. When the Welcome to the New Simple Volume Wizard

xxviiWindows XP/Server 2003 Users’ Instructions (continued) 16. When the Format Partition window appears, enter a new name for the volume table if yo

Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases.Software updates

3Before Creating RAID Groups 1. If you’re not already in the Sonnet Web Management Tool, type the IP address of your RX1600Fibre in a standard browse