Sonnet-technologies Fusion RX1600RAID (Without Drives) Manual do Utilizador descarregar pdf (Página 7)

Enclosure Setup

2. Connect each of the data cables’ remaining connectors to either of

the mini-SAS ports on the Sonnet RAID controller card; verify the

connectors are plugged in securely (Figure 15).

3. Connect the supplied power cables between the Fusion

RX1600RAID enclosure and a grounded wall outlet or power

strip; verify the cables are plugged in securely.

4. Push the power switch on the front of the enclosure, and then

power on your computer.

5. Refer to

Figure 15

mini-SAS

connector

mini-SAS

connector

1 2 3 4 5 6 7 8

Sem comentários

Sonnet-technologies Fusion RX1600RAID (Without Drives) Manual do Utilizador Página 7